
Call the World of Fax Order Hotline at 1-866-FAX-PART for Helpful Order Assistance!!!
RETURN TO WORLD OF FAX MAIN PAGE
COMMON ERROR CODES FOR THE:
    MFC
7300C 
| CODE | DESCRIPTION | 
| 23 | Printer engine time out. | 
| 25 | Ink cartridges had already been loaded when the power first applied. | 
| 30 | The cartridge cannot travel to the right or left. | 
| 31 | After driven by the specified number of pulses, the carriage does not stop | 
| 32 | The carriage movement parameter exceeded the travel range during printing. | 
| 33 | The carriage cannot move in midway of travel. | 
| 34 | The carriage stops during the short travel. | 
| 35 | The carriage stops during low speed travel. | 
| 36 | The carriage stop position is out of the travel range. | 
| 37 | The carriage speed exceeds the allowable limits. | 
| 38 | The carriage speed drops below the allowable limit during constant travel. | 
| 39 | The carriage has overridden the travel range. | 
| 3B | Printing area error. | 
| 3C | Sudden carriage during printing. | 
| 41 | The head drive voltage has not been turned Low to High within the specified time. | 
| 42 | The head drive voltage has not been turned High to Low within the specified time. | 
| 43 | Head thermistor broken. | 
| 44 | Head thermistor short-circuited. | 
| 45 | Flushing operation abnormally ended. | 
| 46 | The number of performed purge sequences has reached the limit | 
| 47 | Head parameter stored in the EEPROM on either of the two print heads is invalid. | 
| 4B | Abnormal carriage travel speed detected when the power was applied. | 
| 4D | Reference voltage for video capture is abnormal. | 
| 4E | Drive voltage rank setting for print head is abnormal. | 
| 50 | The purge cam HP switch does not come ON even after the purge cam has been driven by the specified number of pulses. | 
| 51 | The purge cam HP switch does not go OFF even after the purge cam has been driven by the specified number of pulses. | 
| 52 | At the time of purge operation, the carriage has not stopped in the purge position | 
| 53 | The pump switching cam HP switch does not go OFF even after the switch cam has been driven by the specified number of pulses. | 
| 73 | Any of the four ink cartridges is not set into place. | 
| 82 | Recording paper feeding error. | 
| 83 | Recording paper jam. (The registration sensor sticks to OFF, indicating that paper jam.) | 
| 84 | Recording paper jam. (The paper ejection sensor has detected a paper jam.) | 
| 88 | Recording paper jam. ( Even after the registration sensor has come ON, the paper ejection sensor does not detect paper.) | 
| A1 | Top cover opened. | 
| A2 | Document too long to scan. | 
| A3 | Document not detected by the document rear sensor. | 
| A4 | 50% or more faulty of white level data. | 
| A7 | One-line feeding timeout. | 
| A8 | One-line scanning timeout. | 
| AC | Less than 50% faulty of white level data. | 
| B7 | A/D voltage regulation error (Exceeding the upper limit). | 
| B8 | A/D voltage regulation error (Dropping below the lower limit). | 
| B9 | Light emission intensity error of the LED array. | 
| D5 | The Modem has failed to complete the command transmission sequence. | 
| E4 | Out of recording paper. | 
| E6 | Write error in EEPROM | 
| E8 | Data scanning error during transmission | 
| EA | Document removed at phase B | 
| F6 | PC Interface error. | 
FOR A COMPLETE PARTS LISTING FOR THIS MODEL CLICK HERE
RETURN TO WORLD OF FAX HOME PAGE
