World of Fax & Copiers
Fax, Copier & Printer Parts/Supplies Specialist

 We Stock full line of parts for Sharp, Xerox, Canon, Brother, Hp,  Toshiba, Panasonic, Ricoh 

     Outside or within the U.S. (845) 624-2332
 
  
Toll Free 1-866-FAX-PART (866-329-7278)

FAX ORDERS TO 845-624-2299

COMMON ERROR CODES FOR THE:

    MFC 6650

CODE DESCRIPTION
71 Laser scanner motor does not lock.
72 Cannot detect Beam Detect signal.
73 No toner cartridge loaded.
74 Toner empty.
75 In-house temperature error.  -  

SOLUTION: REPLACE FUSER UNIT

76 In-house temperature error.  -  

SOLUTION: REPLACE FUSER UNIT

77 In-house temperature error.  -  

SOLUTION: REPLACE FUSER UNIT

78 Heater thermister harness disconnected or broken.  -  

SOLUTION: REPLACE FUSER UNIT

79 Toner thermister disconnected or broken.  -  

SOLUTION: REPLACE FUSER UNIT

80 Paper size setting error. Document too long to scan.
82 Paper feeding error. Document too long to scan.
83 Paper jam. The registration sensor remains ON.
84 Ejection sensor still stays OFF.
88 Paper jam. Even after the registration sensor has gone OFF, the paper ejection sensor still stays OFF.
A1 Top cover opened.
A2 Document too long to scan.
A3 Document not detected by the document rear sensor.
A4 50% or more faulty of white level data.
A7 One-line feeding time-out error.
B9 Light emission intensity error of the LED array.
D5 The MODEM fails to complete the command transmission sequence.
E4 Out of recording paper.
E6 Write error in EEPROM.
E8 Data scanning error during transmission.
EA Document removed at phase B.
F3 Voice message recording or playing-back not started.
F5 EOL not found in page memory transmission mode.
F6 PC interface error.

FOR A COMPLETE PARTS LISTING FOR THIS MODEL CLICK HERE

Return tomain page

RETURN TO WORLD OF FAX HOME PAGE