World of
Fax & Copiers
Fax, Copier & Printer
Parts/Supplies Specialist
We Stock full line of parts for Sharp, Xerox, Canon, Brother, Hp, Toshiba, Panasonic, Ricoh
Outside
or within the U.S. (845) 624-2332
FAX ORDERS TO 845-624-2299
COMMON ERROR CODES FOR THE:
CODE | DESCRIPTION |
85 | Ink ribbon empty. |
87 | Fails to complete the sequence of recording operation. |
8A | Wrong or weak contact of the recording head connectors. |
8B | Recording head overheat. |
A1 | Recording paper cover opened. |
A2 | Document too long to scan. |
A4 | 50% or more faulty of white level data. * |
A5 | Faulty operation of DMAO during scanning. |
A6 | Faulty operation of DMA1 during scanning. |
A7 | One-line feeding time-out error. |
A8 | One-line scanning time-out error. |
AB | Document feed-in amount measuring error. * |
AC | Less than 50% faulty of white level data. * |
B9 | Light emission intensity error of the LED array. |
BE | Abnormal clamp PWM value |
BF | Light emission intensity error of the LED array at the setting time of initial values. * |
D5 | The MODEM fails to complete the command transmission sequence. |
D6 | No MODEM interrupt for 60 seconds. |
E6 | Write error in EEPROM. |
E8 | Data scanning error during transmission. |
F3 | Voice message recording or playing-back not started. |
F5 | EOL not found in page memory transmission mode. |
F6 | PC interface error. |
82xx | Although recording paper has been fed by 150 mm after the start of recording, the paper-edge sensor is still OFF. |
8303 | Although recording paper has been fed by 360 mm after the start of recording, the paper-edge sensor is still ON. |
8406 | Although the trailing edge of recording paper has passed out of the platen and further fed for 100 mm, the paper ejection sensor is still ON. |
8407 | Within 10 mm of paper feeding from when the paper ejection sensor went OFF, the sensor has come ON again. |
840C | The paper ejection sensor is ON when you turn the power on or after you open and close the recording paper cover. If the paper-edge sensor is also ON, error code 880B appears. |
8809 | Before the start of paper feeding, the paper-edge sensor is already ON. |
880A | Although recording paper has been fed by 50 mm after the start of recording, the paper ejection sensor is still OFF. |
FOR A COMPLETE PARTS LISTING FOR THIS MODEL CLICK HERE