World of
Fax & Copiers
Fax, Copier & Printer
Parts/Supplies Specialist
We Stock full line of parts for Sharp, Xerox, Canon, Brother, Hp, Toshiba, Panasonic, Ricoh
Outside
or within the U.S. (845) 624-2332
FAX ORDERS TO 845-624-2299
COMMON ERROR CODES FOR THE:
| CODE | DESCRIPTION |
| 81 | Cam home positioning error |
| 82 | Recording paper feeding error |
| 83 | Recording paper jam. The paper edge sensor remains ON. |
| 84 | Recording paper jam. The paper ejection sensor remains ON. |
| 85 | Ribbon empty. |
| 87 | Fails to complete the sequence of recording operation. |
| 88 | Recording paper jam. Even after the paper edge sensor has come ON, the paper ejection sensor still stays OFF. |
| 8A | Wrong or weak contact of the recording head connectors. |
| 8B | Recording head overheat. |
| A1 | Top cover opened. |
| A2 | Document too long to scan. |
| A3 | Document not detected by the document rear sensor. |
| A4 | 50% or more faulty of white level data. |
| A5 | Faulty operation of DMAO during scanning. |
| A6 | Faulty operation of DMA1 during scanning. |
| A7 | One-line feeding time-out error. |
| A8 | One-line scanning time-out error. |
| A9 | Abnormal scanning reference voltage. |
| AB | Document feed-in amount measuring error. |
| AC | Less than 50% faulty of white level data. |
| B1 | CODEC LSI error. |
| B8 | Amplifier gain error. |
| B9 | Light emission intensity error of the LED array. |
| BA | Scanning error: The Left-hand black reference line which is marked on the document pressure bar for scanning width setting is not detected. |
| BB | Scanning error: The right-hand black reference line which is marked on the document pressure bar for scanning width setting is not detected. |
| BC | Scanning error: Reduction miss. |
| BD | Scanning error: Enlargement miss. |
| D1 | The MODEM setup bit sticks to High. |
| D2 | CTS stays OFF or ON if the MODEM RTS ia turned ON or OFF, respectively. |
| D3 | Bit B1 A of the MODEM stays OFF. |
| D4 | Bit RX of the MODEM stays OFF. |
| D5 | The MODEM fails to complete the command transmission sequence. |
| D6 | No MODEM interrupt for 60 seconds. |
| E1 | Microprocessor MPU error on the control panel PCB. |
| E4 | Out of recording paper. |
| E5 | Recording paper set error. |
| E6 | Write error in E2PROM. |
FOR A COMPLETE PARTS LISTING FOR THIS MODEL CLICK HERE