Call the World of Fax Order Hotline at 1-866-FAX-PART (1-866-329-7278) for Helpful Order Assistance!!!

CLICK HERE TO RETURN TO THE WORLD OF FAX MAIN PAGE TO VIEW ALL OF OUR PRODUCTS         

Xerox_WorkCentre_Pro_645_Error_/_Troubleshooting_Codes     XeroxWorkcenter  Pro 635 / 645 / 657 Fax Parts      WorkCentre Pro 645     Xerox WorkCentre Pro 645 Error / Troubleshooting Codes, Xerox WorkCentre Pro 645 Fax Parts, Xerox WorkCentre Pro 645 parts, Xerox copier parts, Xerox printer parts, Xerox WorkCentre Pro 645, Xerox WorkCentre Pro 645 Fax, Xerox WorkCentre Pro 645 Parts, Xerox, Copier, Parts, Xerox, Printer, Parts, Xerox, WorkCentre, Parts, Xerox WorkCentre Pro 645 Rollers, Xerox WorkCentre Pro 645 Fusers, Xerox WorkCentre Pro 645 Feed, Xerox WorkCentre Pro 645 Tires, Xerox WorkCentre Pro 645 Error / Troubleshooting Codes

ERROR / TROUBLESHOOTING CODES

ERROR CODE DESCRIPTION SOLUTION
PRINTER PROBLEM NOTIFY THE SERVICEMAN A printer error that must be solved by a Service Representative has 
occurred. 
* Press the Stop key.
* Turn the power Off, then On.
*21  The new Developer Unit does not 
function properly.
* Perform RAP 36.
* Check the Developer Unit contact terminals.
* Replace the Developer Unit (PL 12.1)
* Replace the Main PWB (Rep 6.8)
*22 The Fuser is not at the required temperature. * Perform RAP 39.
* Check the connection from the Fuser to the Power supply unit.
* Replace the Fuser Unit (REP 7.5)
* Replace the Main PWB (REP 6.8)
*41 The Laser's internal motor does not rotate.  * Perform RAP 38.
* Check the connection at the main PWB, 
CN12.
* Replace the Laser (REP 5.1)
* Replace the Harness (Main-Laser) between the laser and the Main PWB (PL 7.1).
* Replace the Main PWB (REP 6.8).
*42 The laser beam is not functioning normally.  * Perform RAP 38.
* Check the connection at the Main PWB.
CN5
* Replace the Laser (REP 5.1).
* Replace the Harness (MAIN-LASER)
between the Laser and the Main PWB 
(PL 7.1).
* Replace the Main PWB (REP 6.8).
*61 The Printer Drive Motor does not rotate.  * Perform RAP 35.
* Replace the Drive Assembly (REP    7.9).
* Replace the Main Motor (REP 7.6).
* Replace the Main PWB (REP 6.8).
*71 The Fan connector is not attached to the main PWB. 

* Perform RAP 14.                                       * Check the connection at the Main        PWB.
* Replace the Fan (REP 3.2).
* Replace the Main PWB (REP 6.8).

FOR A COMPLETE PARTS LISTING FOR THIS MODEL CLICK HERE

      RETURN TO WORLD OF FAX MAIN PAGE

ERROR CODE DESCRIPTION SOLUTION
10 Add paper, repeat operation. RX
11 Clear paper jam, perform RAP 30. RX
12 Clear document jam, perform RAP 40. TX
13 The top cover was opened and the transmission aborted. Repeat the operation. TX
20 A power failure occurred during the operation, and the document data was cleared.  Repeat the operation. TX/RX
22 A file error occurred due to a directory error.  Perform a memory clear. If the error reoccurs, replace the Main PWB (REP 6.8) TX/RX
30 The communication was aborted by pressing the Stop key. TX/RX
32 The actual number of document pages done not match the designated number of document pages.  The documents were transmitted  anyway. TX
33 Due to mismatching of the polling password or absence of 
the polling document, polling was not performed.  Check the
polling password, confirm the polling document on the
sending machine and repeat the operation.
RX
42 The memory was exceeded in a transmission or reception. 
Check the memory condition, and repeat the operation.
Perform Direct Send Transmission if the document is too
large for memory.
TX/RX
50 The remote machine's line was busy.  Check the memory
condition and repeat the operation.
TX
53 Due to security feature, it was not possible to receive 
documents from the party whose fax number did not match
the number assigned to any Speed or One Touch dialing
numbers.
TX
87 Full memory to remote machine.  Check remote machine, then
repeat operation.
TX
BO NSF/DIS cannot be detected.  (Initial signal not detected).  Check the receiving machine, and repeat the operation.
Perform RAP 54.
TX
B1 The Station Number did not match.  DIS/NSF that cannot be
handled by the sending side was received.  NSS or DCS
other than those declared with the DIS/NSF on the receiving
side was received.  Check the functions of the sending/
receiving machine, repeat the operation.  Perform RAP 54
TX/RX
B2 DCN received (Phase B Error), repeat the operation.
Perform RAP 54.
TX/RX
B3 DCS/DTC not detected (Phase B Error), repeat the operation.
Perform RAP 54.
TX/RX
B4 Training error.  The sending side did fall-back but no
transmission was possible.  The receiving side had a time
out or received DCN after a time out.  Perform ADJ 5.2 on
the sending machine, then repeat the operation.  Perform
RAP 54.
TX/RX
B5 CFR not detected (Phase B Error), repeat the operation.
RAP 54.
TX/RX
C0 Picture signal carrier not detected, repeat the operation.          Perform RAP 54. TX/RX
C1 The receiving side could not detect a high speed signal.
Perform ADJ 5.2 on the sending machine, then repeat the
operation.  Perform RAP 54.
TX/RX
C2 Picture signal carrier off, repeat the operation.  Perform RAP 54. TX/RX
C3 Decode error.  The receiving side cannot detect EOL or
decode in MMR. Perform RAP 54.
RX
C4 EOL time over, repeat the operation.  Perform RAP 54. TX/RX

FOR A COMPLETE PARTS LISTING FOR THIS MODEL CLICK HERE

RETURN TO MAIN PAGE                             

RETURN TO WORLD OF FAX MAIN PAGE

Xerox WorkCentre Pro 645 Error / Troubleshooting Codes, Xerox WorkCentre Pro 645 Fax Parts, Xerox WorkCentre Pro 645 parts, Xerox copier parts, Xerox printer parts, Xerox WorkCentre Pro 645, Xerox WorkCentre Pro 645 Fax, Xerox WorkCentre Pro 645 Parts, Xerox, Copier, Parts, Xerox, Printer, Parts, Xerox, WorkCentre, Parts, Xerox WorkCentre Pro 645 Rollers, Xerox WorkCentre Pro 645 Fusers, Xerox WorkCentre Pro 645 Feed, Xerox WorkCentre Pro 645 Tires, Xerox WorkCentre Pro 645 Error / Troubleshooting Codes     Xerox WorkCentre Pro 645 Error / Troubleshooting Codes, Xerox WorkCentre Pro 645 Fax Parts, Xerox WorkCentre Pro 645 parts, Xerox copier parts, Xerox printer parts, Xerox WorkCentre Pro 645, Xerox WorkCentre Pro 645 Fax, Xerox WorkCentre Pro 645 Parts, Xerox, Copier, Parts, Xerox, Printer, Parts, Xerox, WorkCentre, Parts, Xerox WorkCentre Pro 645 Rollers, Xerox WorkCentre Pro 645 Fusers, Xerox WorkCentre Pro 645 Feed, Xerox WorkCentre Pro 645 Tires, Xerox WorkCentre Pro 645 Error / Troubleshooting Codes     Xerox WorkCentre Pro 645 Error / Troubleshooting Codes, Xerox WorkCentre Pro 645 Fax Parts, Xerox WorkCentre Pro 645 parts, Xerox copier parts, Xerox printer parts, Xerox WorkCentre Pro 645, Xerox WorkCentre Pro 645 Fax, Xerox WorkCentre Pro 645 Parts, Xerox, Copier, Parts, Xerox, Printer, Parts, Xerox, WorkCentre, Parts, Xerox WorkCentre Pro 645 Rollers, Xerox WorkCentre Pro 645 Fusers, Xerox WorkCentre Pro 645 Feed, Xerox WorkCentre Pro 645 Tires, Xerox WorkCentre Pro 645 Error / Troubleshooting Codes     Xerox WorkCentre Pro 645 Error / Troubleshooting Codes, Xerox WorkCentre Pro 645 Fax Parts, Xerox WorkCentre Pro 645 parts, Xerox copier parts, Xerox printer parts, Xerox WorkCentre Pro 645, Xerox WorkCentre Pro 645 Fax, Xerox WorkCentre Pro 645 Parts, Xerox, Copier, Parts, Xerox, Printer, Parts, Xerox, WorkCentre, Parts, Xerox WorkCentre Pro 645 Rollers, Xerox WorkCentre Pro 645 Fusers, Xerox WorkCentre Pro 645 Feed, Xerox WorkCentre Pro 645 Tires, Xerox WorkCentre Pro 645 Error / Troubleshooting Codes     Xerox WorkCentre Pro 645 Error / Troubleshooting Codes, Xerox WorkCentre Pro 645 Fax Parts, Xerox WorkCentre Pro 645 parts, Xerox copier parts, Xerox printer parts, Xerox WorkCentre Pro 645, Xerox WorkCentre Pro 645 Fax, Xerox WorkCentre Pro 645 Parts, Xerox, Copier, Parts, Xerox, Printer, Parts, Xerox, WorkCentre, Parts, Xerox WorkCentre Pro 645 Rollers, Xerox WorkCentre Pro 645 Fusers, Xerox WorkCentre Pro 645 Feed, Xerox WorkCentre Pro 645 Tires, Xerox WorkCentre Pro 645 Error / Troubleshooting Codes